Materials Needed
-
Assorted cotton fabrics in different shades of pink, white, and floral prints.
-
Sewing machine.
-
Matching sewing thread.
-
Fabric scissors or rotary cutter.
-
Cutting mat and quilting ruler.
-
Pins or sewing clips.
-
Iron and ironing board.
-
16 x 16 inch pillow insert.
Step-by-Step Instructions
Step 1 – Prepare Your Fabrics
Choose 8 to 12 different cotton fabrics in pink, blush, white, and floral patterns.
Cut your fabrics into horizontal strips of varying widths.
Suggested strip widths:
-
1.5 inches
-
2 inches
-
2.5 inches
-
3 inches
Make sure each strip is at least 18 inches long.
Step 2 – Arrange the Fabric Strips
Lay your fabric strips on a flat surface and arrange them horizontally.
Alternate solid pink fabrics with floral prints, stripes, and lighter fabrics to create a beautiful patchwork effect.
Experiment with different combinations until you are happy with the arrangement.
Step 3 – Sew the Strips Together
Take the first two fabric strips and place them right sides together.
Sew along the long edge using a 1/4-inch seam allowance.
Open the fabrics and press the seam flat with an iron.
Continue adding the remaining strips one at a time until all the strips are joined together.
Press each seam as you go to keep the fabric flat and neat.
Step 4 – Trim the Patchwork Front
Once all the strips are sewn together, place your patchwork piece on your cutting mat.
Using a quilting ruler and rotary cutter, trim the edges to create a neat 17 x 17-inch square.
This will give you a finished pillow front measuring approximately 16 x 16 inches after sewing.
Step 5 – Prepare the Back Pieces
For an easy envelope-style pillow cover, cut two pieces of fabric for the back.
For a 16 x 16-inch pillow cover, cut:
-
One piece measuring 17 x 12 inches.
-
One piece measuring 17 x 12 inches.
Take one long edge of each piece, fold it over 1/4 inch, press, fold again another 1/2 inch, and stitch to create a clean finished edge.
These finished edges will form the envelope opening.
Step 6 – Assemble the Pillow Cover
Place the patchwork front piece right side up.
Lay the two back pieces on top, right sides facing the patchwork.
Position the back pieces so their finished edges overlap in the middle.
Align all four outer edges and pin or clip them together.
Step 7 – Sew Around the Edges
Sew around the entire square using a 1/2-inch seam allowance.
Backstitch at the beginning and end to secure the stitching.
Trim the corners diagonally without cutting through the stitches.
Turn the pillow cover right side out through the envelope opening.
Use a blunt tool to gently push out the corners.
Press the edges with an iron.
Step 8 – Insert the Pillow
Insert your 16 x 16-inch pillow form through the envelope opening.
Adjust the corners and smooth the fabric so the pillow looks full and even.
Step 9 – Add Decorative Details (Optional)
If you want to give your pillow cover an extra special touch, consider adding a decorative border, lace trim, or small fabric embellishments. You can also add a few decorative stitches along the seams to highlight the different fabric patterns. These little details will make your patchwork pillow even more unique and give it a lovely handmade finish.
Your beautiful pink patchwork pillow cover is ready!
Helpful Tip: For a look similar to the inspiration photo, use narrow and wide fabric strips in alternating shades of pink, with small floral prints between solid fabrics. The variety of patterns is what makes this pillow so charming!
