Project
Christmas poinsettia table topper
Suggested finished size
Approximately 30 × 30 in
Shape
Octagonal
Technique
Patchwork + appliqué
Skill level
Confident beginner to intermediate
Seam allowance
¼ in throughout
The finished piece is made in five main sections:
-
A central poinsettia flower with red petals and green leaves.
-
A cream-colored geometric background.
-
A dark green inner border.
-
A red-and-green Christmas floral border decorated with cream flowers.
-
Dark green outer binding, batting, and backing.
2. Materials and supplies
Fabric
Red, dark green, cream, and Christmas floral cotton fabrics.
Tools
Rotary cutter, ruler, cutting mat, pins, scissors, and sewing machine.
Quilt layers
Batting, backing fabric, coordinating thread, and binding fabric.
Fabric requirements
For a topper approximately 30 inches across, allow extra fabric for trimming and correcting mistakes.
| Fabric | Suggested amount | Purpose |
|---|---|---|
| Red solid or tonal print | ½ yard | Poinsettia petals |
| Dark green solid or tonal print | ½ yard | Leaves, borders, binding |
| Cream or ivory | ¾ yard | Background and flower petals |
| Red Christmas floral print | ¾ yard | Decorative outer border |
| Green Christmas print | ½ yard | Border accents |
| Batting | 36 × 36 in | Quilt interior |
| Backing fabric | 36 × 36 in | Quilt back |
| Fusible web | ½ yard | Optional appliqué adhesive |
Fabric quantities are estimates and depend on the print direction, cutting layout, and final size.
3. Prepare the pattern templates
The central flower is the focal point of the design. To recreate its appearance, use elongated, pointed petals arranged in two layers, with green leaves visible between them.
Prepare these paper templates before cutting your fabric.
Template shapes
Template A — Large red petals
Cut a symmetrical pointed petal, approximately 6½ inches long and 2½ inches wide. Make eight petals.
The pointed ends create the characteristic star-shaped poinsettia silhouette.
Template B — Green leaves
Draw a pointed leaf approximately 5½ inches long and 2 inches wide. Make eight leaves.
Use a deep forest green fabric, preferably with a subtle tonal pattern.
Template C — Border flowers
Draw an individual rounded petal approximately 2 inches long and 1¼ inches wide. Make five or six petals per flower.
These create the cream-colored flowers on the outer border.
Template D — Flower centers
Cut small golden yellow circles approximately ¾ inch in diameter for the center of the poinsettia. Make seven small circles, plus centers for the border flowers.
Important: The template dimensions above are approximate finished design dimensions. When using raw-edge appliqué, add a seam allowance only if you plan to turn the edges under. Fusible raw-edge appliqué generally does not require an extra turning allowance.
4. Cut the fabric pieces
Wash and press your fabric before cutting if you normally prewash your quilting cotton.
Cut the following pieces:
| Piece | Quantity | Cutting size |
|---|---|---|
| Cream center background | 1 | 16½ × 16½ in |
| Dark green inner border strips | 4 | 2½ × 16½ in |
| Red floral border strips | 4 | 5½ × 20½ in, approximately |
| Green outer accent strips | 4 | 1½ × 28½ in, approximately |
| Green binding strips | 4 | 2½ × 42 in |
| Red flower petals | 8 | Use Template A |
| Green leaves | 8 | Use Template B |
| Cream border petals | 5–6 per flower | Use Template C |
The border strip lengths are starting estimates rather than exact final measurements. The octagonal corners and angled joins will affect the final dimensions, so measure the actual assembled center before cutting the border to its final length.
For the most accurate octagonal shape, cut the corners after the central panel and borders have been assembled.
5. Create the central poinsettia flower
Step 1 — Mark the center
Place the 16½-inch cream square on your work surface.
Using a ruler, draw light diagonal lines from corner to corner. Mark the exact center where the lines intersect.
These guidelines will help you position the petals symmetrically.
Step 2 — Position the green leaves
Arrange eight green leaves around the center, with their pointed ends directed outward.
Position them at the top, bottom, left, right, and four diagonal directions.
The leaves should form a star behind the red petals. Leave a small opening at the center so that the flower’s golden center can be added later.
Pin the leaves in place.
Step 3 — Add the first layer of red petals
Arrange four red petals in a cross formation, pointing toward the top, bottom, left, and right.
Place the wider portions toward the center and the pointed ends outward.
Overlap the inner ends slightly to create a full flower.
Step 4 — Add the second layer of red petals
Position the remaining four red petals diagonally between the first four.
Adjust the spacing until the petals look balanced and the green leaves remain visible between them.
The petals should form a symmetrical, eight-pointed flower.
Step 5 — Secure the appliqué
Choose one of the following methods:
-
Fusible appliqué: Apply fusible web according to the manufacturer’s instructions, arrange the petals and leaves, and press them into place.
-
Raw-edge appliqué: Stitch close to the edges using a narrow zigzag or blanket stitch.
-
Turned-edge appliqué: Turn the edges under and hand-stitch for a softer, traditional finish.
For this design, fusible appliqué with a narrow blanket stitch is a practical option.
Step 6 — Add the golden center
Arrange seven small golden circles in a compact cluster: one in the middle and six surrounding it.
Stitch each circle securely. You can use fabric circles with turned edges, felt circles, or small appliqué pieces.
This creates the distinctive golden center seen in the reference image.
6. Add the cream geometric background
The reference design includes cream triangular shapes between the red petals and the green leaves. These give the flower its crisp, geometric appearance.
Step 1
Cut cream fabric into small triangles using a paper template. The exact dimensions depend on the spacing between your petals and leaves.
Step 2
Arrange the triangles around the flower so that the cream points face inward toward the petals, with the wider edges toward the surrounding border.
Step 3
Check that the cream areas are evenly spaced and that the green leaves remain visible between the red petals.
Step 4
Secure the triangles using fusible appliqué or traditional piecing. Press carefully to avoid distorting the background square.
Alternative method: If you prefer traditional piecing rather than appliqué, construct the cream and green star-shaped background separately using half-square triangles, then appliqué the red flower over the completed block.
7. Construct the dark green inner border
The narrow dark green border separates the central flower from the red floral outer border.
-
Measure the cream center panel after finishing the appliqué.
-
Cut four dark green strips to match the panel’s sides.
-
Sew one strip to the top and one to the bottom, using a ¼-inch seam allowance.
-
Press the seams toward the green fabric.
-
Sew the remaining two strips to the left and right sides.
-
Press the entire panel flat.
If you want the octagonal appearance to be more pronounced, trim the corners after attaching the surrounding borders rather than cutting the center panel into an octagon at this stage.
8. Create the Christmas floral border
This border is one of the most distinctive parts of the design. It features a red botanical print with green leaves, cream flowers, and dark green framing.
Step 1 — Prepare the red floral strips
Cut four red Christmas-print strips approximately 5½ inches wide.
Measure the center assembly and adjust the lengths to fit the four sides. Keep the direction of the print consistent if the fabric has a directional pattern.
Step 2 — Position the border strips
Sew the strips to the dark green inner border, matching the center points and keeping the seam allowances consistent.
Press the seams toward the floral fabric.
Step 3 — Make the cream flowers
For each flower:
-
Cut five or six cream petals using Template C.
-
Arrange them in a circle, overlapping the narrow ends slightly.
-
Place a golden or dark red center in the middle.
-
Stitch the petals onto the floral border.
-
Add a small amount of decorative quilting around the petals if desired.
Make enough flowers to distribute them evenly around the outer border.
Step 4 — Arrange the flowers symmetrically
The reference image features flowers distributed around the border, including along the top, bottom, sides, and diagonal areas.
Lay the entire quilt top flat before stitching the flowers permanently.
Keep a similar distance between each flower and avoid placing the flowers too close to the seam lines.
Step 5 — Add the green accent border
Attach a narrow dark green or green-print strip around the floral border.
This creates a clean frame and visually connects the outer border with the center flower.
9. Shape the topper into an octagon
The finished quilt has eight sides rather than four square corners.
To create the octagonal outline:
-
Lay the completed quilt top on a large flat surface.
-
Measure the shortest side of the assembled square.
-
Mark equal distances from each corner along both adjoining edges.
-
Connect the two marks at each corner with a straight line.
-
Cut along the marked lines.
For a square approximately 30 inches across, you might start by marking about 8 inches along each edge from every corner. Adjust these marks to obtain the desired octagonal proportions.
Tip: Make a paper or cardboard template before cutting the fabric. Check that all eight sides are symmetrical.
10. Assemble the quilt sandwich
A quilt sandwich consists of three layers:
-
Backing: The fabric on the underside.
-
Batting: The soft layer in the middle.
-
Quilt top: The completed poinsettia design.
Step 1 — Prepare the backing
Cut your backing fabric at least 3 inches larger than the quilt top on every side.
Step 2 — Add the batting
Lay the backing fabric wrong side up. Place the batting on top, smoothing out wrinkles.
Step 3 — Position the quilt top
Place the quilt top right side up over the batting.
Align the layers carefully and smooth them from the center outward.
Step 4 — Baste the layers
Use safety pins, temporary fabric adhesive, or hand-basting stitches to hold the layers together.
Place the pins approximately 3–4 inches apart, particularly around the appliqué and flower centers.
11. Quilt the layers
The quilting should enhance the flower without overwhelming the patchwork.
Recommended quilting plan
Central flower
Stitch around the outlines of the red petals and green leaves. This is called outline quilting and helps the appliqué stand out.
Cream background
Use small meandering stitches or gentle echo lines around the flower.
Dark green border
Stitch parallel lines along the length of the border.
Red floral border
Follow the printed stems and leaves where practical, or use simple curved lines around the cream flowers.
Flower centers
Secure the golden circles with small circular stitches or a few tight securing stitches.
Work slowly around the pointed petals and keep the fabric flat to prevent puckering.
12. Finish the edges with binding
The dark green binding gives the topper a polished finish.
-
Cut 2½-inch-wide strips of dark green fabric.
-
Join the strips diagonally to reduce bulk at the seams.
-
Press the long strip in half lengthwise, wrong sides together.
-
Align the raw edges of the binding with the raw edges of the quilt.
-
Sew the binding around the perimeter using a ¼-inch seam allowance.
-
At each corner, stop ¼ inch before the edge, backstitch, and fold the binding to create a neat mitered corner.
-
Fold the binding over the edge to the back of the quilt.
-
Hand-stitch the folded edge in place or use a machine topstitch.
Because the topper is octagonal, take particular care when turning the binding at each of the eight corners.
13. Final finishing checklist
Before displaying your table topper
0 of 8
Tips for the best result
-
Use a mixture of solid and small-scale prints to maintain the definition of the flower.
-
Choose a warm ivory rather than a bright white for a traditional Christmas look.
-
Press each seam before joining the next section.
-
Make a test flower on scrap fabric before cutting all the petals.
-
Keep the green binding consistent with the inner border to frame the design.
-
If this is your first appliqué project, practice the pointed petal edges on spare fabric before working on the final quilt top.
The key to reproducing this design is the layered poinsettia, the cream geometric background, and the contrast between the dark green framing and the red floral border. These elements create the traditional Christmas look shown in the reference image.
